Home

Products

Ultraviolet Laser
266nm 355nm 375nm
Blue Laser
405nm 435nm 450nm 457nm
473nm 480nm 488nm 491nm
Green Laser
501nm 515nm 523nm 526nm
532nm 543nm 556nm  
Yellow Laser
561nm 589nm 593nm
Red Laser
635nm 640nm 650nm 655nm
656nm 660nm 671nm 685nm
690nm 705nm 722nm 730nm
Infrared Laser Modules
750nm 785nm 808nm 830nm
850nm 885nm 914nm 915nm
940nm 946nm 965nm 975nm
980nm 1030nm 1047nm 1053nm
1064nm 1085nm 1112nm 1122nm
1313nm 1319nm 1342nm 1444nm
1450nm 1470nm 1550nm 1870nm
1900nm 1940nm    
Low Noise Laser
473nm 532nm 543nm 556nm
561nm 593nm 635nm 640nm
650nm 655nm 660nm 671nm
685nm 690nm 705nm 730nm
885nm 914nm 915nm 940nm
946nm 965nm 975nm 980nm
1030nm 1047nm 1085nm 1112nm
1122nm 1313nm 1319nm 1342nm
1444nm 1450nm 1470nm 1550nm
Single Longitude Mode Laser
457nm 473nm 526nm 532nm
561nm 671nm 1064nm 1342nm
Fiber Coupling Laser
 
 
 
RGB White Laser
He-Ne Laser System
Laser Pointer and Laser Gun sight
Laser Optic
Laser Diode
Laser Eyewear
Laser Stage Lighting
Infrared laser illuminator

Services

Contact US

 
Single Channel Erbium-doped Fiber Pre-Amplifier for C-band

 

 

Single Wavelength Erbium-doped Fiber Amplifier(SW EDFA Module)

is a fiber amplifier product series specially used in fiber laser or fiber communication system, due to use semiconductor laser pumped Erbium-doped fiber to provide gain to signal ,which has these advantages of high energy conversion efficiency. high gain and low noise. Our SW EDFA is easy to operate tests. The user can adjust the pump current through the front panel, this changes the gain and output power of the amplifier. We also provide compact EDFA module for system integration, support PC software control and serial command control.

 

It has two types: small signal amplifier and booster amplifier

 

Small signal amplifiers  is PA,Pre-Amplifier, is dedicated to amplifying small optical signals in the range of -45 dbm ~-25 dbm. the typical small signal gain is as high as 35dB or 45dB and has a low noise coefficient. usually used before an optical receiver to improve its sensitivity.

 

Characteristics

Apply
Wide working wavelength range Fiber communication
High gain Fiber sensing
Low noise Fiber Laser
 
Model   SL-SW-EDFA-PA-35dB SL-SW-EDFA-PA-45dB  
Specifications Unit   Remarks
Wavelength nm 1530-1565 C-band
Input power dBm -35 - -25 -45 - -25  
PA Gain factor dB 35 @ -35dBm input 45 @ -45dBm input  
Noise dB 4.5  
Gain flatness dB 3  
Polarization Dependent Gain dB <0.3  
Polarization mode dispersion ps 0.5  
Input/Output  isolation dB 35  
Operating temperature -5 - +55  
Operating humidity % 0-70%  
Fiber mode Single mode fiber SMF-28e  
Fiber connector
FC/APC or  customized
 
Operating voltage

DC5V or 100-240VAC

 
Control mode Button or RS232  
communication interface DB9 Female optional  
Work mode ACC  
Size 260(W)〜320(D)〜120(H)

125(W)〜150(D)〜20(H)

Desk Type

Module Type

Warranty time One year  

Copyright © by Shanghai Sail Laser Technology Co., Ltd.